Adjusting Live View Settings - W Box Technologies 0E-HD4C1TD Mode D'emploi

Adjusting Live View Settings

Live View settings can be customized according to different needs. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Steps:
1. Enter the Live View Settings interface.
Menu> Configuration> Live View
The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for. Outputs include HDMI/VGA and CVBS
(depends on the model).
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in Live View.
•
Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.
•
Event Output: Designates the output to show event video; if available, you can select a different video output
interface from the Video Output Interface when an event occurs.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
1. Set the camera order.
1) Select View tab.
2) Select an output interface and select a screen layout.
August 2016 24