Replacing The Lamp Tubes; Important - Klarstein 10007538 Mode D'emploi

In the event that the lights are faulty, or when they come to end of their life, the two light tubes can be
replaced. NOTE: Do not replace the lamp tubes which are not provided by the supplier. To do so, proceed as
follows:

Important:

Always unplug the appliance and let it cool off.
For safety reasons, do not remove any components or screws other than those specified below.
1. Slacken the retaining screws on the back
using a screwdriver, and remove the front
cover.
2. Cut the cable ties and remove the two
tube' s transparent retaining clips using a
screwdriver.
3. Carefully pull the tube out of the housing
and replace a new tube.
4. When inserting the tube, following these
instructions in reverse order.

Replacing the Lamp Tubes

22