CEMO 10690 Mode D'emploi Et De Maintenance page 8

2. Safety Rules & Warnings
Wear safety equipment before using this machine
Oil inside this tank can cause damages to the skin..
Be careful for slippery floor when working with this machine..
Never spray the content of this tank on a person.
Never weld the metal parts of this machine
1 Do not disassemble parts of this machine w/o authorization of the
manufacturers or authorized services.
Never hit this machine with any tool when it is not working.
Use only original parts.
CEMO is not responsible in case of disrespect of any of the warnings
and safety rules above.
3. Assembly & Using Instructions
For oil suction:
- Be sure all the valves are closed.
- Connect the air coupler to air inlet nipple shown on picture 1.
- Open the valve shown on picture 1.
- When the vacuum gauge reach the -600 mbar, close the valve.
- Choose the oil suction probe and connect to the oil suction hose.
Fig. 1
Fig.
2
For oil discharge ;
- Be sure all the valves are closed.
- Connect the air coupler to air inlet nipple shown picture 3.
- Open the valve shown picture 3.
Attention !
- Take a care when you proceed this operation.
- Choose correct place and tank for oil discharge.
- Connect the oil discharge hose to the tank.(picture 4)
- Open the valve shown in picture 4 and proceed to discharge.
Customers obligations
Before using the device, read carefully this manual.
The customer must have trained staff with equipment knowledge to use this
equipment.
The customer must take the necessary measures for safety and environment when using
this device.
This device can only be used to drain oil, do not use it for other liquids or applications.
Fig.
Fig.
3
4