Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Congratulations on your Sunforce Purchase. This product is designed to the highest technical specifications and
standards. It will supply years of maintenance free use.
installation, then store in a safe place for future reference. If at any time you are unclear about this product, or
require further assistance please do not hesitate to contact our trained professionals operating the customer
support line 1-888-478-6435 or email to
Your Solar Motion Light is the perfect system for your home and business. It is controlled by a sensor which
measures ambient luminance and movement. It has a total working time of 20-30 minutes per day (not
continuous). Your Motion Light has an average range of 0-12 meters (0-36 feet).
PARTS LIST AND ASSEMBLY DIAGRAM
Part
Description
1
Lamp
2
Solar Panel (5m wire)
3
Expansion screw
4
60 LED's
5
Battery Housing
6
Motion Detector Head
7
"U"
shaped
Plate
OPERATION
• Before the Solar Motion Light can operate to its full capacity, the Solar Panel needs to be in sunlight for 3
days to fully charge the included battery. Charging should be done with the unit in the "OFF" position.
• Turn the switch to "AUTO" position, the light will turn on automatically at night when motion is detected by
the Motion Detector Head (6).
• Turn the switch to "ON" position, the light can be used as a standard light for constant illumination.
info@sunforceproducts.com
Part
8
9
10
11
12
13
Mounting
14
Please read these instructions thoroughly prior to
Description
ON/OFF/AUTO Switch
Battery Housing outlet
Solar
Panel
Mounting
Bracket
LUX Adjusting Knob
SENS Adjusting Knob
TIME Adjusting Knob
NI-HM battery (not shown)
2
Publicité
Table des Matières
