Diamond WPCTVPRO Mode D'emploi page 6

The following section shows you how to install the DisplayLink USB Graphics software on different
operating systems.
Windows 8 and Windows 8.1
Windows 8/8.1 DisplayLink software can be installed from Windows update (Recommended and must
have Internet access).
Plug the USB transmitter into a free USB 2.0/3.0 port to your computer. Windows update will
automatically download and begin the installation. Note: if you are using a Microsoft Surface Pro you may
need a USB extension cable as it has been reported that the transmitter may not be able to plug in all the
way.
Alternatively, the software can be downloaded and installed from the DisplayLink website following the
steps below.
Important notice for manual installations! Do not connect your
WPCTVPRO to your PC before the install.
Note: To ensure you have the latest driver release, it is recommended to down load the drivers from
Displaylink.com, which is the USB graphic chipset used on the Diamond WPCTVPRO. If you do not have
internet access you can use the drivers located on the included Install CD.
http://displaylink.com/support/downloads.php
Double click on Setup.exe or example; DisplayLink_7.7 M0.exe, where 7.7 is the version and may vary
depending on the latest version release number.
Click Yes
The DisplayLink software end user license agreement window
opens.
Click I Accept.
DisplayLink Core software and DisplayLink Graphics installs.