Troubleshooting - Salora DVP9048TWIN Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting

PROBLEM
Make sure the machine is connected properly.
No sound or
Make sure all cables are securely inserted into
distorted sound
the appropriate jacks.
You can't advance through the opening credits
Can't advance
and warning information that appears at the
through a movie
beginning of movies because the disc is
programmed to prohibit that action.
The feature or action cannot be completed at
this time because:
1.The disc's software restricts it.
The icon
2.The disc's software doesn't support the
appears on
feature (e.g.,angles)
screen
3.The feature is not available at the moment.
4.You've requested a title or chapter number
that is out of range.
The disc might be damaged.Try another disc;
it is normal for some distortion to appear during
Picture is distorted
forward or reverse scan.
Some discs have sections that prohibit rapid
scanning or chapter skip;If you try to skip
through the warning information and credits
No forward or
at the beginning of a movie,you won't be able
reverse scan
to.This part of the movie is often programmed
to prohibit skipping through it.
If at any time in the future you should need to dispose of this product please
note that waste electrical products should not be disposed of with household
waste.Please recycle where facilities exist.Check with your Local Authority
or retailer for recycling advice.(Waste Electrical and Electronic equipment
Directive)
Owing to continuous improvement,no prior notice will be given regarding changes on
above feature and spec.
SOLUTION
24

Publicité

Table des Matières
loading

Table des Matières