In Car Installation - Salora DVP9048TWIN Mode D'emploi

In Car Installation

1. Fit the headrest mount to the DVD Player / Monitor as required.
NOTE: Both the headrest mounts are the same, there is no difference for DVD Player or
Monitor.
UP
C
A
front
E
Turn the headrest mount and player around so the backs are facing you.
back
Turn the headrest mount and player around so the front is facing you.
The DVD player will fit to the mount
in this position, as shown below.
D
B
F
Slide the vertical straps A and B through the
strap lock upon the back of the DVD player,
or monitor, as shown.
Fold and secure the horizontal straps on to
the back of the mount until the velcro attaches.
Ensure the DVD player or monitor is mounted
centrally.
Bring straps C, D, E & F in front of the DVD
Player and attach to the velcro as shown.
4
2. Fitting the headrest mount to the headrest
PULL PULL
This item incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Fit the straps around the headrest and
engage the 2 trident clips.
Ensure clips are securely fastened.
Pull the straps tight using the adjustment.
Tuck the loose ends into the strap tidy.
5