Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OH 3512
APPLICATION FIELD
The mechanical characteristics, shape and dimensioning mechadraulic cylinders make their use limited to car industry, such
as:
Disassembly of injectors;
Assembly of bearings;
Coaxial release of very tight mechanical components;
SPECIFICATIONS
TABLE A
Force
Strokes
Dimensions
Driing torque/Max. pressure
Weight with grease
Extraction bushes supplied
ATTENTION: Use the Max. torque indicated in the chart in the
first part of the manual .
Grease temperature range of use
Recommended viscosity of the fluid
Center distance of the 4 holes for fastening the cylinder
Size of fixing holes
OPERATIONS
Use the cylinder only withthe bushes supplied. Do not use improperly.
Cylinder should be placed so as to have a stable and firm base, which is perpendicular to the direction of the piston thrust.
Lubricate the screw with grease or lubricating oil.
Move forward the piston screwing clockwise the screw pusher, which is on the handle. Use a normal CH. 19 wrench and
keep fix the hexagonal end part with a CH.30 wrench.
DO NOT USE ELECTRICAL OR PNEUMATIC SCREWERS or other power-assisted systems to increase the torque on the
pusher.
The piston maximum stroke is of 8 mm.
The screw cannot be screwed beyond this travel.
For piston return, unscrew anti-clockwise the pusher up to complete withdrawal of the former.
Remove the mechadraulic cylinder from its position only after verifying that each component is not stressed by its thrust.
Notes:
Do not allow piston rotation during its thrust. Piston rotation could damage internal seals above all the return spring.
GO-THROUGH MECHADRAULIC CYLINDER 12T+ADAPTERS
12T
8 mm
80x260x45 mm
56Nm/700 Bar
1,65 Kg
M18x1.5
M16
M14
M12
M10
de -25°C à 80°C
15÷100 mm²/s
68 x 36,5 mm (fig. 1)
Ø7 mm (fig. 1)
Ø
11
(4x)
Ø (4x)
7
68
Fig. 1
Publicité
Table des Matières
