1.4- Once the probe is inserted, the actual meat temperature
will be displayed on the LCD above COOKING TEMP and
will increase gradually during cooking. The alarm will
automatically beep when the probe temperature
(COOKING TEMP) reaches the preset cooking
temperature (ALERT TEMP), indicating the meat is
cooked to the desired doneness.
Preset temperatures for each type of meat and doneness:
Meat type
Doneness
Beef
Well done
Medium
Medium rare
Rare
Pork
Done
Medium
Chicken (poultry)
Done
Turkey
Done
Veal
Well done
Medium
::: It is possible to change the preprogrammed temperature
of the selected doneness. To set your own desired
temperature, touch and hold simultaneously
for 3 seconds. The ALERT TEMP temperature will flash,
then touch
to increase or
to decrease the desired
temperature. Press
to select the displayed
temperature, it will automatically stop flashing. Insert the
probe into the meat (following the instructions given
previously at 1.3). The alarm will automatically sound when
the desired internal temperature is reached.
2. PROGRAMMABLE MODE
Programmable mode allows to customize the temperature
settings.
::: Touch
until PROGM is displayed above the screen.
::: To set your own temperature, touch and hold simultaneously
and
flash, then touch
temperature. Press
will automatically stop flashing. Insert the probe into the food
to be cooked following the previous instructions given at 1.3
Preset
temperatures
and 1.4.
°C
°F
UNIT CONVERSION °C OR °F
::: To convert the temperature measurement from Celsius to
71 °C
160 °F
Fahrenheit, touch and hold
56 °C
133 °F
temperature reading will automatically change.
54 °C
129 °F
52 °C
126 °F
HOW TO USE THE TIMER
::: Select the timer mode by sliding the left button on the back
77 °C
171 °F
to TIMER position.
63 °C
145 °F
::: The display will show 00 (hour) : 00 (minute). Touch
time in increments of 5 minutes or touch
82 °C
180 °F
settled time in increments of 1 minute. Hold the button for fast
82 °C
180 °F
adjustment. Maximum timer value is 99 hours 59 minutes.
::: To start or stop the timer, touch
77 °C
171 °F
and minutes will flash to indicate that the timer is on.
60 °C
140 °F
::: To reset the timer, touch and hold
CLEANING
::: The unit is not waterproof. Do not immerse in water or place
in the dishwasher. This may cause serious damage to the
and
product. After use, wipe the unit with a soft, slightly
damp cloth.
::: Clean the probe and the wire thoroughly before and after
each use with a damp cloth and warm soapy water. Take care
to not immerse the wire connector into water.
::: The steel probe and wire will be hot after use. To prevent
burning, clean after they have completely cooled down.
for 3 seconds. The ALERT TEMP temperature will
to increase or
to decrease the desired
to select the displayed temperature, it
for 3 seconds and the
to decrease the
:
. The "
" between hours
and
simultaneously.
to set
If you have any questions regarding this product, please
contact our customer service:
::: by e-mail: customerservice@ricardocuisine.com
::: by phone: 1-833-751-4101