Monitor Function; Declaration Of Conformity - Doro wt87 Manuel D'utilisation

Masquer les pouces Voir aussi pour wt87:
Table des Matières

Publicité

Voice control (VOX)
The voice control will automatically activate the transmitter after one second. Test different settings until the sensitivity selected
is acceptable. There is however always a risk that noise from the surroundings may activate the transmitter.
VOX will be displayed while the function is active.
1.
Press w three times, VOX will then be displayed.
2.
Scroll to the desired sensitivity using v / V (
3.
Press PTT.
Call melody
The transmitted call melody can be set to different variants.
1.
Press w four times,
CA
2.
Scroll to the desired melody (1 -5) using v / V (
3.
Press PTT.

Monitor function

The monitor function can be used in weak signal areas to locate any other signal being transmitted.
1.
Press w and V at the same time.
2.
To stop monitoring press w .
Termination (Roger) tone
If activated, a beep tone will be heard when you release the PTT button. This can be used as a reminder to the other person that
you have finished talking and are waiting for a response.
1.
Press w five times,
RO
2.
Scroll to the desired setting using v / V (
3.
Press PTT.
Key tone
1.
Press w six times,
to
2.
Scroll to the desired setting using v / V (
3.
Press PTT.
Searching two channels (Dual Watch)
You can enter a second channel for simultaneous listening while using the selected operating channel.
1.
Press w seven times, DCM will then be displayed.
2.
Scroll to the desired setting using v / V (
3.
Scroll to the desired transfer code using v / V . Press PTT.
Scanning
You can scan all available channels to locate any signals being transmitted. Press PTT to stop at the located channel.
1.
Press w and v at the same time. The handset will start searching.
2.
To stop scanning press w .
Channel lock
The channel lock function serves to protect the selected channel and sound volume of the handset through preventing
unintentional usage of these buttons ( w and v / V ).
1.
Press and hold w until the key symbol is displayed.
2.
To deactivate the channel lock press and hold w until the key disappears.

Declaration of conformity

Doro declares that the apparatus Doro wt87 complies with the essential requirements and other relevant positions of Directive
1999/5/EC. A copy of the Declaration of Conformity can be found at
Guarantee
This product is guaranteed for a period of 12 months from the date of purchase. Proof of purchase is required for any service or
support required during the guarantee period. This guarantee shall not apply to a fault caused by an accident or a similar incident
or damage, liquid ingress, negligence, abnormal usage, not reasonably maintained or any other circumstances on the purchaser's
part. Furthermore, this guarantee shall not apply to a faults caused by the use of poor quality batteries, battery leakage, corrosion
or similar events related to non DORO batteries. This guarantee does not in any way affect your statutory rights.
UK
If you cannot resolve the fault using the faultfinder section,
technical support is available by email: tech@doro-uk.com -
premium rate telephone number: 0905 895 0854, calls cost 50
pence per minute (prices correct at the time of publication).
You can also contact us in writing (regarding any Spares or
Technical query):
OF
will then be displayed.
will then be displayed.
=off,
OF
will then be displayed.
=off,
OF
=off ). Press w .
OF
English
=off, 1=least sensitive....3=most sensitive).
=off ).
OF
=on).
On
=on).
On
www.doro.com/dofc
Customer Services
Doro UK Ltd, 1 High Street
Chalfont St Peter, Buckinghamshire, SL9 9QE.
Further contact details are available on our website:
www.doro-uk.com

.

Publicité

Table des Matières
loading

Table des Matières