Auto Mode - AeroFlow X3D Notice D'utilisation

8. AUTO mode

In AUTO mode, the thermostat follows
the programme of the day.
The symbol indicate a heating
request (configuration CF16).
The automatic programme can be
temporarily suspended by:
- a "Party Mode" override (
- an Absence mode (
- a window magnetic contact (symbol
if the function is activated (configuration CF08).
The heating then goes to Frost Protection.
- an absence detection (symbol
activated (configuration CF08).
The heating then goes to "lower":
• Absence 1.5 -> Active setting -1.5°C
• Absence 3.5 -> Active setting -3.5°C
• Absence 48 h -> Frost-protection
: Heating request
: Party mode
: Absence mode
: Temperature measured
: Outdoor temperature
: Door/window magnetic
contact active
),
),
),
off), if the function is
: Presence detection
in progress
: External override
: Spent battery
: Radio transmission
- 44 - - 44 -