Cf08 - Opening Detection Function; Cf09 - Presence Detection Function; Cf10 - Value Of The Max. Comfort Setting; Cf11 - Programming Format - AeroFlow X3D Notice D'utilisation

4. Configuration

CF08 - Opening detection function

0
1
If a door/window magnetic contact (e.g. window) is associated with
the receiver, the heating will switch to Frost protection when the
window is opened.

CF09 - Presence detection function

0
1
If a motion detector is associated with the receiver, the
temperature will be lowered automatically in the event of an
extended absence:
• 1.5 h -> Active setting -1.5°C
• 3.5 h -> Active setting -3.5°C
• 48 h -> Frost protection setting

CF10 - Value of the max. comfort setting

Can be set from 22°C to 30°C.
Default value: 28°C

CF11 - Programming format

0
1
Disabled
Enabled
Disabled
Enabled
Programming in 1 h steps
Programming in 1/2 h steps
- 36 - - 36 -