Usb Mode; Bluetooth Mode - Aiwa BBTU-300 Mode D'emploi

12
en

USB MODE

PLAYING MUSIC VIA USB
This boombox has been developed using
the latest technical advances in the USB
field. However, given the wide range of USB
storage device types that are currently in the
market, we unfortunately cannot guarantee
full compatibility with all of them. For this
reason, in rare cases, there may be problems
playing files from some USB storage devices.
This is not due to device malfunction.
1. Slide the MODE switch to the CD-USB-
BT-AUX position to turn on the unit.
2. Press and hold the USB/BT/ button
until the "USb", USB MODE INDICATOR
appears flashing on the left of the display.
3. Connect a USB storage device directly
to the USB/MP3 port. The display briefly
shows the number of folders and then
the total number of tracks. Playback will
automatically start after a few seconds.
To temporarily stop playback, press the
4.
button, and press it again to resume
playback.
5. Press the or buttons to select a
.
different track number
Press and hold the or buttons to find
a specific passage within the track and
release it at the point you want to listen to.
6. Press the button to stop playing.
LISTEN TO YOUR TRACKS REPEATEDLY
Press the REPEAT button on the front panel
repeatedly to activate the REPEAT FUNCTIONS
in the following order:
1. *FLASHING (repeat the current track)
(repeat all the tracks of
2. FOLDER
the current USB folder)
3. (repeat all the available tracks)
4. RANDOM (play randomly all the tracks
in the USB)
5. OFF (cancel the repeat/random function)
CREATING A USB PLAYLIST
The Program feature may be used to program
up to 99 tracks for the USB mode too, in a
programmable playlist.
1. While in stop mode only (no USB playback),
press PROG, and the LCD display will show
the wording "P01" and the "PROGRAM"
indicator.
2. Press the or buttons to allocate the
desired track.
Press the PROG button to select and store
3.
the track into the memory.
The program sequence will change to
"P02" to choose the next track.
4. Repeat steps 2 and 3 to select up to 99 tracks.
Once the last track has been added, the
LCD display will automatically show the
programmed tracks one by one, starting
with the first one that was programmed.
If you want to create a playlist with less
than 99 tracks, press twice the PROG
button after confirming your last track.
To play the selected tracks (in the program
5.
mode), press the button.
6. Press the button to hear the previous
programmed track or press to hear the
next programmed track.
7. To clear the programmed tracks from the
memory, press the button twice or change
to another function mode.
Notes:
• If the USB is not compatible, or there is
no USB storage device connected, the
display will show the word "NO".
• Because some storage devices have a
large capacity, USB access time is a little
longer.
• If the playlist reaches the maximum
number of tracks the display will show
the word "FUL" (FULL).
• Switch the device to a different operating
mode before you remove the USB storage
device.
• To avoid damaging the boombox or other
devices, do not try to charge any external
device using the USB port.

BLUETOOTH MODE

BLUETOOTH PAIRING
Prior to using the Bluetooth function, your boombox should be paired first with your Bluetooth
device. ("Pairing" means establishing connection between Bluetooth devices such as mobile phones,
tablets, pc, etc).
1. Slide the MODE switch to the CD-USB-BT-
AUX position.
(fig. 1)
2. Press and hold the USB/BT/ button
until the "bt" (Bluetooth) function mode
appears on the display.
(fig. 2)
3. In Bluetooth mode, a voice prompt will
announce Bluetooth pairing mode.
The BLUETOOTH MODE LED INDICATOR
will start flashing in blue.
And the boombox will search automatically
for Bluetooth devices.
4. Turn on the Bluetooth function on your
device and make it visible (see your
device's instructions to add or setup a
Bluetooth device).
5. Search for Bluetooth devices and select
AIWA BBTU-300
Enter the code "0000" if needed.
(fig. 3)
If the devices are paired successfully, the
BLUETOOTH MODE LED INDICATOR will
keep bright, and a prompt voice will notify
that the Bluetooth device is connected.
Having paired successfully, the device will
connect automatically next time.
6. Press and hold PAIR to disconnect the
currently paired Bluetooth device.
(fig. 4)
PLAY FROM A BLUETOOTH DEVICE
1. Press the button to play.
To pause or resume play, press the
2.
button again.
3. Press the or buttons to select a
different track number.
13