Safety Instructions; General Description; Technical Information; Fluid Compatibility - Sotera Tuthill 825 Manuel D'utilisation Et De Sécurité

Dear Sotera Customer,
Thank you for buying a Sotera product. Sotera Systems
represents a new age in transfer and measuring equipment.
This manual contains valuable information about your new
equipment and its operating and service requirements. Please
take a few minutes to review this material carefully.
Sotera's mission is to provide fluid handling systems that
deliver the most accurate, safe, convenient, and economical
transfer systems for users of chemicals.
If, for any reason, any of the products do not meet your
performance expectations, we want to hear from you. Your
comments and suggestions are requested and appreciated.
Thank you again for buying a Sotera Systems product. We look
forward to serving you in the future.
The Sotera Team
1-800-634-2695

Safety Instructions

To ensure safe and efficient operation,it is essential
to read and follow each of the following warnings and
precautions.
1. Agricultural herbicides flowing through the meter may
be harmful to your health. Use and disposal of these
products is controlled by federal, state, or local laws and
procedures.
2. Conform to fluid manufacturer's recommended
han dling procedures when using product and when
cleaning meter.
3. Do not exceed an internal meter pressure of 120PSI
/8.2 Bars.
4. Improper use or installation of this product can cause
serious bodily injury or death.
5. The 825 & 850 Digital Meter is not for use with
flammable fluids. DO NOT use with fluids with a flash-
point below 100°F (such as gasoline and alcohol).
6. DO NOT REMOVE PC BOARD.
Damage to LCD could occur, and warranty is void.

General Description

The Sotera 825 and 850 Meters are nutating disk,
positive displacement meters that use magnetic coupling
to convert fluid flow into digital display information. The
meter can store and display the current flow amount
(current total),or cumulative flow amount (totalizer) in any
of five user specified units (ounces, pints, quarts, liters,
and gallons) or special units (e.g. per acre volume). The
meter can be calibrated without dispensing fluid simply by
selecting a calibration factor from the 20 stored settings.
Power is supplied by two AA field replaceable batteries.
Pulser models have the added ability to connect to
fluid management systems for additional control and
monitoring of fluid being dispensed.

Technical Information

Flow Ports: 1" NPT inlet / outlet ports, female threads
3/4" BSP inlet / outlet ports, female threads
Flow Range: 2 to 20 U.S GPM / 7.6 to 75.7 LPM
Pressure: 120 PSI / 8.2 Bars maximum @ 70° F / 21° C
50 psi / 3.4 Bars maximum @ 130° F / 54° C
Temperature: Min. operating temperature = 0° F / 17° C
Max. operating temperature = 130° F / 54° C
Meter can be stored at lower temperatres but
display may not work below 0° F.
Accuracy: ± 0.5%
Units of Measure: Ounces,pints, quarts,liters,gallons;
special calibration option also available.
Range: 9999 current total; 10,000,000 accumulated total
Materials of Construction
Body: Polypropylene*
Chamber: Ryton 303 Stainless Steel*
Wetted Seals: Fluorocarbon (EPDM Available)*
Electronic Module Weather & Dust Seal: Nitrile
Display: LCD (Liquid Crystal Display)
Power: Two alkaline AA batteries (included)
*Wetted Materials

Fluid Compatibility

The 825 & 850 Digital Meters will handle most pesticides,
automotive fluids (except gasoline), and mild acids.
It is known to be compatible with the following fluids:
Aatrex 4L®
Abate 4E®
Apron®
Agrotain®
Assure II®
Atraz ine 4L
Banvel®
Banvel SFG®
Bicep®
Blazer®
Treflan®
Dual®
**Camix TM
Caustic Soda (50%)
Clarity®
2
Guardsman®
Harness xtra®
Karate®
Laddock S-12®
Lasso Micro Tech®
*Lumax TM
Manifest™
Marksman®
Maxim®
Methyl Parathion Broadstrike®+
Motor Oil Broadstrike®+
Nufos®
Phosphoric Acid
Poast®
Poast HC®