Cleaning And Maintenance - Linea 2000 DOMO DO157A Mode D'emploi

MODE KNOB /
This button allows you to configure three functions: ventilation, natural and sleep mode.
Ventilation
Press the button once to activate ventilation. A symbol
setting is activated. This setting allows for 4 speed configurations, to be controlled with the + and -. The
selected speed appears on the display. The fan will maintain a constant speed in accordance with the
speed configuration.
Natural
Press the mode knob twice to activate the natural mode. A symbol
that this mode is activated. The fan simulates a natural breeze. This mode offers 2 levels:
· 1: Medium-high speeds are alternated periodically.
· 2: High speeds are alternated periodically.
The selected level appears on the display.
Sleep mode
Press the mode knob three times to activate sleep mode. A symbol
that this mode is activated. The fan distributes a constant light breeze. This mode offers 2 levels:
· 1: The fan operates at speed 2 for the first 30 minutes and then switches to speed 1. The fan remains
operating at this speed.
· 2: The fan operates at speed 3 for the first 30 minutes and then switches to speed 2 for the next 30
minutes. After that, the fan switches to speed 1.
The selected level appears on the display.
TIMER
You can set the timer between 30 minutes and 10 hours. Press the timer button. The associated symbol
appears on the display. Use the plus and minus buttons on the control panel to set the desired time.
The numbers on the display will blink briefly so you can set the time. Once they stop blinking, the time has
been set. You can set the timer per half hour up to 3 hours. If you wish to set the timer for more than 3
hours, increase/decrease per hour up to a maximum of 10 hours. Once the configured time has passed,
the device will deactivate automatically.
Note: When setting the time on the remote control, use the timer button instead of the + and - buttons.

CLEANING AND MAINTENANCE

· Remove the plug from the socket before cleaning the appliance.
· Replace the honeycomb water filter every 1 to 2 months for optimal operation.
· The dust filter can be cleaned with water and a soft brush. Dry thoroughly before placing it back.
· Clean the water reservoir once a month for optimal and hygienic operation. Remove the water
reservoir from the device and clean with some mild detergent and water. Empty the water reservoir,
dry it off and return it to the device.
· Regularly vacuum the air vent at the front to remove dust. Or wipe clean with a damp cloth.
www.domo-elektro.be
appears on the display to indicate that this
appears on the display to indicate
appears on the display to indicate
25
DO157A