Getting Started - BERNSTEIN CT1099 Notice De Montage

FILL VALVE INSTALLATION
Refill tube
WARNING
Do not use or drop any chlorine or any chemical related components within/on the product. The use of such substances
will result in damage to the tank components and may cause flooding and property damage. Do not overtighten nuts, or
tank/bowl may crack.

1. GETTING STARTED

Remove the inoperative tank fittings and carefully clean the water cistern/tank.
Make sure all impurities are removed before installing the new tank fittings.
2. FILL VALVE INSTALLATION AND WATER LEVEL ADJUSTMENT
u
bracket
bolt
overflow
tank pipe
1. Unscrew the bracket bolt and locate/install the filling valve on the overflow pipe of the flush valve.
2. Then tighten the bracket bolt.
3. Connect the water supply to the inlet shank, turn on the water supply valve (angle stop). Make sure that the refill tube
has been inserted in the flush valve overflow pipe. The cistern will now be filled.
4. Check that the inlet valve is functioning normally and adjust the inlet valve float adjustment float using the vertical
adjusting screw. Turn it clockwise (for higher float & water level) or anticlockwise (for lower float & water level)
according to the requirements.
4
CT1099
overflow pipe
v
bracket
bolt
overflow
pipe
1. Please read carefully the following installation instructions in
order to avoid component damage or injury to the installer.
2. The instructions have been composed based in the latest product
specifications. We reserve the right to make modifications to the
packaging and specifications without providing prior notification.
3. When installing the fill valve,the critical level on the fill valve
(identified on the valve marked "CL") should be at least 1")
above the top of the overflow pipe of the flush valve.This is a
plumbing code.
4. We shall not be responsible for failures due to the misuse of
product components.
Water Temperature: 2°C to 45°C.
5.
6. Water Pressure Range: 0.2 Bar to 8 Bar.
w
inlet adaptor
water supply
pipe
water supply
switch
x
screw rod