Peavey 3D Mix Pro Mode D'emploi page 33

40. Contr™le Space SRS
Le contr™le Space SRS augmente la sŽparation stŽrŽo entre les sorties droite et gauche. LÕimage stŽrŽo sera
accentuŽe au maximum si vous tournez le contr™le ˆ fond dans le sens horaire.
41. SRS Collapse
Une pression sur ce bouton annule soudainement lÕeffet du contr™le Space du SRS. Nous lÕavons appelŽ
ÒcollapseÓ (effondrement) ˆ cause de son effet sur le champ stŽrŽo. LÕimage sonore passe soudainement dÕun
champ stŽrŽo surŽtendu ˆ un signal mono. Le Collapse SRS peut •tre utilisŽ pour crŽer un rythme ou une
sensation sonore dŽroutante lors de votre performance.
THD:
<0.05% (20 Hz - 80 KHz BW)
FREQUENCY RESPONSE:
+0 dB /-1 dB, 20 Hz - 20 kHz
HUM AND NOISE: (22 Hz - 22 kHz BW)
<-110 EIN (mic)
<-90 dBu, all controls off, any output
<-80 dBu nominal settings, gains minimum,
any output
CROSSTALK:
-60 dBu (1 kHz) left to right;
-70 dBu (1 kHz) channel to channel
STEREO CHANNEL EQ (+12 dB, -22dB):
HI: 10 kHz shelving
MID: 850 Hz peaking
LOW: 70 Hz shelving
MIC CHANNEL EQ (+15 dB, -15 dB):
HI: 10 kHz shelving
LOW: 80 Hz shelving
LOW CUT FILTER: 18 dB/oct @ 75 Hz
RUMBLE FILTER:
18 dB/oct @ 40 Hz
3D MIX PRO SPECIFICATIONS
is a registered trademark of SRS Labs, Inc.Ó
MIN INPUT LEVELS FOR 0 dBu OUTPUT:
(All controls at maximum gain settings)
MIC: -57 dBu (1.0 mv RMS); 2 k ohms
LINE/CD: -23 dBu (55 mv RMS); 10 k ohms
PHONO (@ 1KHz): -50 dBu (2 mv RMS); 47 k ohms
SRS CONTROLS:
Space, collapse switch, enable (with LED)
LOOP LEVEL:
0 dBu nominal
SIGNAL INDICATORS (LED):
Signal Present: Indicates the signal has
exceeded the -20 dBu level. 12 Segment
ladder indicates main output level (0 dB =
0 dBu)
PHANTOM POWER:
+15V, both mic inputs
POWER REQUIREMENTS:
15 W 115 VAC or 230 VAC (Export model)
33