Chronograph Timing Functions - Marathon PILOT'S CHRONOGRAPH Mode D'emploi

3. CHRONOGRAPH TIMING FUNCTIONS

1. Completely unscrew pusher lock rings A and B.
Press pusher A to start the chronograph count-up timing.
2.
Press pusher A to stop/interrupt the chronograph count-up timing.
3.
4. Press pusher B to return the chronograph hands to zero. ( This only works
when chronograph hands are in the stopped position.)
5. Completely screw in the pusher lock rings when finished timing.
(Example: for "start", "stop", "start" : press pusher A, A, A)
CAUTION: Do not use push buttons underwater. Ensure that pusher lock rings are
completely screwed in when not in use . This is essential to prevent moisture damage to
the movement.
ENGLISH
NOTE: The crown stays in position
1 when using the Chronograph
timing function.
SUB-DIALS:
The top inset dial registers 30
minute intervals. The bottom
inset dial registers 12 hours with
indicators at every 30 minutes.