Wagan Tech Quick Flow Guide D'utilisation page 3

SPECIFICATIONS
• Pressure Reader: 150 PSI GAUGE
• Air Hose: 18 inches
• 12V DC Cord: 10 feet
• Accessories: 2 nozzle adapters, 1 sports needle
• Power Required: 12V 13A DC
AIR COMPRESSOR OPERATION
WARNING: Do not overheat the unit! If the compressor is not pumping
a steady stream of air and appears sluggish or if metal fittings get too
warm to the touch, these are indicators that the compressor has been in
operation for too long. Immediately turn off the compressor and allow it
to cool for approximately 30 minutes before resuming operation. Never
leave compressor unattended while in use.
Do not over inflate items beyond their needs. Most car tires will inflate
properly between 30 and 35 psi depending upon the tire. Some racing
bicycle tires require pressure in excess of 75 psi. Other bicycle tires may
require substantially lower pressures. This unit is not fitted for high-
pressure tires such as those used on large commercial trucks.
Keep out of reach of children.
1. To achieve optimal performance, your vehicle's engine should be
running when operating your air compressor.
2. Unwind power cord from the storage compartment of the unit and
insert the DC plug into the 12 Volt cigarette lighter socket of your
vehicle.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2013 Wagan Corporation. All Rights Reserved.
2