Sd Card Insertion And Formatting - Victure AC800 Mode D'emploi

②
①
2. Install the battery cover after the battery has been inserted. Please note
the extended part of the battery cover should be inserted to the left of the
battery compartment first as below picture shown. Then press the right half
of the battery cover down into the battery compartment.
Tips:
Please note the directions of the battery and battery cover.

SD Card Insertion and Formatting

After the batteries fulled charged with power, a SD card is needed to get
the camera working. Our camera supports Class 10 micro SD card, maxim
support 64GB. Please note the SD card is NOT INCLUDED in the camera.
SD Card Insertion and Out :
1. Find the Micro SD card slot in the camera, inserting the card into the
camera as the direction mark shows on the camera until you hear a
insertion sound.
2. SD card out: Press down the SD card until you've heard a insertion
sound; Then the SD card will pop out along with a poping sound.
7