Ego Power+ SNT2400 Guide D'utilisation page 32

MOUNTING AND DETACHING DRIFT CUTTERS
(AVAILABLE AND SOLD SEPARATELY)
1. Remove the batteries.
2. Insert the two bolts into the deck and mount the drift cutter and wing nuts onto
the bolts. Pre-tighten the wing nuts and keep the drift cutter a little loose for
adjustment (Fig. 31).
3. Move the drift cutters to the desired position (Fig. 32).
4. Tighten the wing nuts to secure the drift cutters.
31
Wing Nut
Drift Cutter
32
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC
Bolt
32