Ego Power+ SNT2400 Guide D'utilisation page 22

AUIGER-SWITCH TRIGGER AND
SELF-PROPEL TRIGGER LINKAGE
(Fig. 15)
When you activate the self-propel trigger
and the auger-switch trigger at the same
time, the auger-switch trigger will be
temporarily locked. Release the auger-
switch trigger (right hand) and the auger-
switch trigger will remain engaged. This feature allows you to adjust the auger speed,
self-propelling speed, and discharging direction of the snow while the auger rotates.
To stop the auger, release the self-propel trigger and both the auger and the self-propel
function will stop.
CHUTE AND DEFLECTOR
ADJUSTMENT
The chute can be adjusted to change
both the direction and the distance of the
discharged snow to assist you in moving
snow away from one area and placing it
in another.
The direction of snow removal can be
adjusted up to left 100° and right 100°
(Fig.16).
1. Pull the chute-rotation handle to the
left to rotate the chute to the left.
2. Pull the chute-rotation handle to the right to rotate the chute to the right.
The throwing distance of the snow blower is adjusted by moving the chute deflector
up or down.
22
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC
15
16
Chute-Rotation Handle
Auger-Switch Trigger
Self-Propel Trigger
Side-Discharge Chute