Problem Solving - Chacon 34036 Mode D'emploi

5. Problem solving

1. False alarms from the main unit
a) Check that there are no animals near the motion
detector.
b) In hot weather, moving shadows may also
activate the alarm. Also ensure that the detector
is not installed near a radiator or heat source.
c) Check that there are no devices with strong
electromagnetic fields near the door/window
sensor. Strong electromagnetic fields can cause
false alarms.
2. The main unit doesn't receive a signal from the
transmitter
a) Check if the pairing between the transmitter and
the main unit was successful.
b) If pairing was successful, check the battery
voltage of the main unit and transmitter. Low
voltage will result in product failure.
3. No alarm sounds after a detection
a) Check if the low battery indicator is flashing
(please replace the batteries immediately).
b) If the unit is armed and set to HOME mode and
the PIR sensor detects an intrusion, the alarm will
EN