Chacon 34036 Mode D'emploi page 46

0. Introduction
Thank you for using this product.
- Please read all instructions carefully before using
the product.
- Do not attempt to disassemble or repair the pro-
duct yourself, as this will invalidate the warranty.
- In order to use this product, you must have either
a simple central unit with a remote control or
a remote keypad, or a central unit with a code.
(Compatible references: 34035, 34038, 34043,
34044, 34045, 34046, 34048)
1.1. Battery Installation: Door Opening
Sensor
1. Using a crosshead screwdriver, remove the screw
on the front of the opening detector
2. Slide the cover down to access the battery
compartment.
3. Insert the battery, ensuring correct polarity (+/-)
4. Close the compartment with the cover and screw.
EN