Safety And General Information; Product Description - Pro-Lift PREMIUM T-5750 Instructions D'utilisation Et Manuel De Pièces

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read, under-
stand, and follow the information provided with and on
this lift. The owner and operator of this equipment shall
have an understanding of this lift and it's safe operating
procedures before attempting to use. The owner and
operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions
and safety information shall be conveyed in the opera-
tor's native language before use of this lift is authorized.
If any doubt exists as to the safe and proper use of this
lift, remove from service immediately. Inspect before
each use. Do not use if broken, bent, cracked or dam-
aged parts are noted. Any lift that appears damaged in
any way, or operates abnormally shall be removed from
service immediately. If the lift has been or is suspected
to have been subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue
use until it has been examined by a Pro-Lift authorized
service center. It is recommended that an annual inspec-
SPECIFICATIONS
Base Size (L x W)
54" x 17-1/2"
Lift Platform
Wheel Bracket
Height
Locking Lever
Height Unlocking
Lever
Lift Surface Capacity
Platform 1250 lbs.
Wheel Bracket 750 lbs.
Locking Swivel
Casters
Figure 1 - Model T-5750 Nomenclature
tion be done by qualified personnel. Labels and Opera-
tor's Manuals are available from the manufacturer (see
Replacement Parts, pg. 6).

PRODUCT DESCRIPTION

The Pro-Lift Commercial Utility Lift is specifically designed
to lift, and support, up to rated capacity loads consisting
of a single vehicle whose frame is compatible with the
lifting platform. Incompatibility is evident when the loaded
mower wobbles, feels unstable, and/or does not sit se-
curely on the lift platform. This product is NOT suitable
for lifting, leveling and/or positioning automobiles, trucks,
SUV's or conveyances other than those specifically listed
and approved above. This product is NOT suitable for
lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. This product does not
contain independent lifting devices, but is designed to
be permanently assembled. The Hydraulic Unit is not to
be used independently of the lift.
Compatible Wheel Track
N/A
61" outside span
Crosshead
Assembly
Positioning
Handle Pin
2
Min. Height
4-3/4"
Ram
Oil Filler
Plug
Air Operated
Hydraulic Unit
Max. Height
30-1/4"
28"
Air
Coupler
Air
Motor