Safety Instructions - Poppstar 1010679 Mode D'emploi

UK
Please read this manual carefully before using the DIN rail power supply.
ATTENTION: Failure to comply with the safety instructions and the instructions for use listed here may result in serious accidents,
personal injury and material damage.
Includes
DIN rail power supply slim, additional sheet linked with the manual
Specifications
Model
Input
Output 12V 3,33A 40W
Adjustable output
voltage
Relative humidity
Temperature
Appliance class
IP code
Power Factor
Correction
Primary cable
Secondary cable
Dimensions (mm)
Weight (g)
For installation on

Safety instructions

• WARNING: Danger! All installation steps described here may only be carried out by experienced specialists who are trained and
experienced in the installation as well as commissioning and maintenance of DIN rail power supplies combined with electrome-
chanical components. The same applies to 230 V mains by qualified electricians.
• WARNING: Electric shock hazard! Incorrect modifications to the Poppstar DIN rail power supply may result in 230 V AC voltage
being applied to other components.
• WARNING: Short circuit hazard! Never insert objects into ventilation slots or sockets.
• WARNING: Fire hazard! Selecting a higher operating voltage than specified by the manufacturer of the product can cause serious
damage to the DIN rail power supply and the electronic devices connected to it!
• For any work carried out on the 230 V AC mains, the current VDE regulations as well as corresponding country-specific regulati-
ons must be respected.
• Incorrect wiring of the DIN rail power supply can lead to destruction of the electronics.
• Keep the product out of reach of children.
• Contains small parts that can be swallowed. Keep away from small children!
• Never open the housing.
• Never cover the product.
• Never expose the product to extreme circumstances such as heat, cold, wet, or humid environments, foreign matters
(e. g. chippings or liquids), direct sunlight, vibrations, shocks or mechanical pressure.
• Do not modify or dismantle the product or accessories.
• Never repair broken products yourself. Please contact our technical support.
• Only use the product in dry indoor areas.
1010679 1010680
12V 5A 60W
11,5V - 14,5V 11,5V - 14,5V
no
40 x 100 x 92 40 x 100 x 92
256
1010681
85 - 264V AC, 50/60 Hz
12V 7,5A 90W
11,08V - 15,26V
Operating: 20 - 95 % (non-condensing)
Storage: 10 - 95 %
Operating: -20 to +60°C
Storage: -40 to +85°C
I
IP 20
no yes
12 AWG - 18 AWG (3,3mm² - 0,8mm²)
Heat-resistant up to min. 80 °C (e. g. UL1007)
55 x 100 x 92
274 382
DIN rail of type TS 35/7.5 or TS 35/15 (or similar)
1010682 1010683
24V 2,5A 60W 24V 4A 96W
23,5V - 29V 22,9V - 31,36V
no
40 x 100 x 92 55 x 100 x 92
270
yes
386