Function Buttons; Menu Function - Klein Tools TI250 Manuel D'utilisation

ENGLISH
NOTE: Fully charge before first use.
CHARGING
Connect included Micro-USB cable to Micro-USB Charging Port
and plug the other end into a computer, USB AC adapter, or other USB
power supply (not included). When charging, the battery indicator will
flash for 10 seconds. Normal charging time is about 3 hours.

FUNCTION BUTTONS

Press Power On / Off Button
on or off. When powering on, the start-up screen will display for
10 seconds as the imager runs self-calibration. When complete,
the display will show the thermal image with the center target
temperature and high / low temperatures.
Press Menu / Select Button
Use the Right

MENU FUNCTION

Press the Menu / Select Button
functions (shown below) will appear on the LCD. Use the Right
and Left Scroll Buttons to scroll through the functions. Press the
5
Menu / Select Button
exit the function, long press the Menu / Select Button
Temperature Units: Selectable between °F and °C.
F
Center Target Temperature and High / Low Temperature:
G
Turns these icons on or off.
Color Pallets: Selectable between Ironbow, Rainbow, and Gray.
H
Gallery (requires microSD
I
Scroll through and view captured photos.
Settings:
J
• Temp Bar: Turns feature on or off.
• Time & Date: Sets time and date stamp for images.
• Emissivity: Adjustable from 0.1 to 0.99 (default is 0.95).
• Auto Power Off: Set to 5, 10, or 30 minutes.
• Brightness: User-selectable low, medum, or high.
• HI/LO Alert: Sets temperature alarms.
• Local Info: Provides information on firmware version, capacity,
availability, code, and battery temperature.
• Default Settings Reset: Restores factory-default settings.
• Format SD: Formats microSD
6
OPERATING INSTRUCTIONS
6
and Left
4 5
to open the function or make a selection. To
6
for 2 seconds to power the unit
2
to access Menu functions and setup.
Scroll Buttons to make selections.
and the Menu and Setup
6
card, not included):
®
card for use with TI250.
®
,
7
4
.
6