LeapFrog Mon Amie Scout Mode D'emploi Et Connexion page 5

WARNING: The USB cable could be a strangulation hazard. Keep out of reach
of children under 3 years of age. The USB cable must be used only by an adult when
connecting to a computer and is to be removed by the adult prior to the use of the toy
by a child. DO NOT allow child to play with the toy if the USB cable is attached.
CAUTION: Routinely check this product for proper and safe condition. If there is
any damage or broken parts, remove product from use.
CAUTION: This is not intended as a crib toy. To prevent entanglement injury
NEVER add strings, ties or other products to this item.
TROUBLESHOOTING
Symptom
My Pal Scout or Violet • Make sure the Power/Volume switch is not
in the OFF position
does not turn on or
• Make sure batteries are correctly installed
does not respond
• Make sure battery cover is securely attached
• Remove batteries and put them back in
• Clean battery contacts by rubbing lightly with a soft
eraser and then wiping with a clean and dry cloth
• Install new batteries
• If USB cable is connected, remove it
My Pal Scout or Violet • Follow the above instructions to clean
battery contacts
operates erratically or
• Turn Scout or Violet off and install new batteries
makes loud noises
Computer does not If you have the LEAPFROG® Connect Application for
My Pals installed:
detect My Pal even
• Check to see if the USB cable is pushed all the way
though USB cable
into each of the ports
is connected on
• Disconnect and reconnect the USB cable to the toy.
both ends
It might take a moment to recognize the toy
• Disconnect all other devices with USB (other than
the mouse and keyboard), then reconnect the toy
• Try connecting the toy to a diff erent USB port
• Be sure to connect to a USB port and not a USB hub
• Use the included USB cable
If you have not yet installed the LEAPFROG® Connect
Application for My Pals:
• Download the application from leapfrog.com/MyPals
• Install and run the application. Then follow the
on-screen instructions
• Disconnect and reconnect the USB cable to the toy
For a more detailed list of troubleshooting hints and other helpful information, go to leapfrog.com/support.
6
Try This
PC Requirements
Internet connection (high-speed connection recommended)
Pentium ® III or equivalent (1 GHz processor or faster recommended)
® ®
Windows XP or Windows Vista operating system
Monitor resolution of 1024 x 768
Available USB port
256 MB of RAM (512 MB recommended)
300 MB free disk space
® ®
Microsoft Internet Explorer Internet browser version 6 or higher
Adobe ® Flash ® Player 9
Mac Computer Requirements (Only available for the English version)
Internet connection (high-speed connection recommended)
PowerPC ™ G4 or any Intel ® -based Apple computer (1 GHz processor or faster recommended)
Mac OS X 10.4.11+ operating system software
Monitor resolution of 1024 x 768
Available USB port
256 MB of RAM (512 MB recommended)
300 MB free disk space
Safari ™ application program
® ®
Adobe Flash Player 9
MAC, APPLE, MAC OS and SAFARI are trademarks of Apple Inc., registered in the U.S.
and other countries.
FCC Notice:
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifi cations to this unit not expressly approved by LeapFrog
Enterprises, Inc., could void the user's authority to operate the equipment.
Environmental Phenomena
• The unit may malfunction if subjected to radio-frequency interference. It should
revert to normal operation when the interference stops. If not, it may become
necessary to turn the power off and back on, or remove and reinstall the batteries.
• In the unlikely event of an electrostatic discharge, the unit may malfunction and
lose memory, requiring the adult to reset the device by removing and reinstalling
the batteries.
7