Rear Spacers; Door Reversibility - Satrap oecoplan 129 GS A++ Mode D'emploi

Rear spacers

Inside the apapliance you find two
spacers which must be fitted as shown
in the figure .
Slacken the screws and insert the
spacer under the screw head, then re-
tighten the screws.

Door reversibility

Before carrying out any operations,
remove the plug from the power socket.
To change the opening direction of the
door, proceed as follows:
• To carry out the following operations,
we suggest that this be made with
another person that will keep a firm
hold on the doors of the appliance
during the operations.
• Open the door with the appliance in
the upright position. Unscrew the
screws and remove the upper door
plastic trim.
• Remove the little plastic cover from
the door plastic trim and refit on the
opposite side (d).
• Lay the appliance onto its back side.
• Remove the plastic hinge covers dx
and sx (3).
• Unscrew the upper hinge and remove it
(1-2)
• Unscrew the screw and remove the
door stopper (4).
3
• Remove the door.
59
2
1
4