Tips And Tricks; Maintenance; Accessories; Repairs - Metabo ASE 18 Mode D'emploi

17026704_0109 ASE 18 NAFTA.book Seite 9 Dienstag, 13. Januar 2009 11:54 11

8 Tips and Tricks

To saw tight curves: Use narrow saw blades.
Sawing metal: To increase the life of the saw
blades, apply cooling lubricant along the cutting
line.

9 Maintenance

On a regular basis, use compressed air to blow out
the machine through the rear ventilation slots.
Regularly clean the saw blade quick-clamping
device (5) and blow out with compressed air. Do
not oil or grease.

10 Accessories

Use only genuine Metabo accessories.
If you need any accessories, check with your
dealer. For the dealer to select the correct
accessory, he needs to know the exact model
designation of your power tool.
See page 4.
A) Comprehensive range of saw blades for
a wide variety of materials and use cases
B) Chargers
C) Battery packs with different capacities.
Use battery packs only with voltage suitable
for your power tool.

11 Repairs

Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.

12 Environmental Protection

Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that can
be recycled.
These instructions are printed on chlorine-free
bleached paper.
Battery packs must not be disposed of with
regular waste! Please return faulty or used
battery packs to your Metabo dealer!
Do not throw battery packs into water.

13 Technical Specifications

Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
n = Stroke rate at idle speed
0
s = Stroke length
m = weight (with smallest battery pack)
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH
ENG
9