Publicité
Les langues disponibles
Les langues disponibles
CONTROL BOARD DESCRIPTION :
1. POWER LED
When voltage is high, it lights green; When voltage is low, it lights
red.
2. POWER SWITCH
Select the "On" position to swith the speaker on. Select the "Off"
position to switch the speaker off.
Note : When operating this switch, make sure that all controls are
set at minimum position
3. CHARGING LED
When battery is charging, the light is flashing in green. When
battery is fully charged, light stops flashing and maintains in green.
It is an AC power LED indicator also.
4. AC SOCKET + FUSE
Plug the AC power cord into any standard AC outlet. Before
plugging this cord in, be sure the voltage of AC outlet is correct.
The fuse protect your speaker from different kinds of ac problems.
If
the meety
is "on" and nothing lights, please verify fuse
compartment. If fuse is broken, please read it and change with a
new one of same size and values.
5. DC SOCKET
This socket is used to plug an external power supply ( 18V DC ( no
provide in the package ).
6. MIC 1 INPUT
Can be used to connect a microphone. Adjust the level by using
the potentiometer (7)
7. MIC 1 VOLUME CONTROL ( WIRED MIC 1 AND WIRELESS MIC
1 )
Use this control to adjust the level of the microphone plug in the
MIC 1 & wireless MIC 1 input to obtain the desired volume.
8. RF LED VHF RECEIVER 1
Before use, please unfold the antenna to have a better receipt.
When you switch the RF microphone on, having the frequency
corresponding to the receiver, the RF led lights on.
Note : You can use the two micros at the same time because they
have two different frequencies.
9. MIC 2 INPUT
Can be used to connect a microphone. Adjust the level by using
the potentiometer (11)
10. RF LED VHF RECEIVER 2
Before use, please unfold the antenna to have a better receipt.
When you switch the RF microphone on, having the frequency
corresponding to the receiver, the RF led lights on.
Note : You can use the two micros at the same time because they
have two different frequencies.
11. MIC 1 VOLUME CONTROL ( WIRED MIC 2 AND WIRELESS MIC
2 )
Use this control to adjust the level of the microphone plug in the
MIC 2 & wireless MIC 2 input to obtain the desired volume.
12. MIC 3 INPUT
Can be used to connect a microphone. Adjust the level by using
the potentiometer (13)
13. MIC 3 VOLUME CONTROL
Utilisez pour ajuster le niveau de sortie du micro connecter sur
l'entrée MIC 3
14. AUX INPUT
This socket is an input. You can adjust the level of this input in
using the potentiometer (15) .
15. AUX VOLUME CONTROL
The external source level adjustment can be used to adjust level
signal to obtain the desired volume.
16. LINE OUTPUT
The level of this output is controlled by the rotary potentiometers of
each peripherical ( VHF receivers, CD player, tape player, wired
microphones ). Connect this output to an additional power
amplifier.
17. TAPE REC OUTPUT
You connect a minidisc or a tape recorder to record your mix or
your meeting.
18. TONE CONTROL
This rotary potentiometer is used to adjust the tonality of . ( in the
left position = treble, in the right position = low )
19. CD / TAPE LEVELCONTROL
The tape/CD level adjustment can be used to adjust level of the
tape/CD signal to obtain the desired volume.
20. ECHO CONTROL
Use this rotary control to add echo effect on all the micro channels
( VHF or wired microphone ).
21. EXT SPEAKER OUTPUT ( WHITE SOCKET )
This white RCA socket can be used to connect one external
speakers. When you plug your cable on this socket, you swith the
internal HP off and all the sound is on the external speaker.
22. EXT SPEAKER OUTPUT ( RED SOCKET )
This red RCA socket can be used to connect one external
speakers. When you plug your cable on this socket, the internal
HP and the external speaker are available.
23. PRIOTITY SWITCH
Turn on voice priority switch, voice priority LED indicator will light.
When using microphone, music will be cut off automatically. Stop
using microphone, music will start again.
24. PRIORITY LED
Turn on voice priority switch, voice priority LED indicator will light.
25. CD DECK POWER SWITCH
This switch turns the tape player and CD player on and off so as to
preserve battery life when they are not needed.
26. MASTER VOLUME CONTROL
This
controls
the
overall
volume
of
the
system.
Publicité
