Publicité
Les langues disponibles
Les langues disponibles
HANDHELD MICROPHONE DESCRIPTION :
Trolley use :
To use the trolley, pull the handle until you reach the height you want. To arrange the trolley, push on the two silver balls inside the trolley.
SAFETY INSTRUCTIONS:
Read all safety instructions before operating meaty
Install equipment as follow condition.
- Install in a flat place, not bending or curved.
- Do not install near water and moisture.
- Place power amplifier away from heat source, such as radiators or other heat source.
Keep in mind the following when connecting amplifiers
- Read the owner manual before connecting the amplifier
- Connect each connection of the amplifier perfectly. If not, it maybe cause hum, damage, electric shock in case of misconnection.
- To prevent electric shocks, do not open top cover.
Connect the power cord with safety after check of AC power.
1. MESH
2. POWER LED INDICATOR
When you switch your microphone on, the LED will light.
3. LOW BATTERY LED INDICATOR
This LED shows you the operating level of the battery. When you
switch your microphone on, the LED lights on for a fast moment then
lights off. If the LED stay lights on, please change the battery because
it 's out of order.
4. POWER SWITCH
This switch have two positions :
Position off : To switch your handheld microphone off.
-
-
Position On : In this position, the microphone is on & the
transmitting is available.
5. BATTERY COVER
Publicité
