When Using The Plasma Tv; Cleaning And Maintenance - HP Pavilion PE4200N Mode D'emploi

If water or foreign objects get inside the
Plasma TV, if the Plasma TV is dropped, or if
the cabinet becomes damaged, disconnect
the power cord plug immediately.
A short may occur, which could cause fire.
■
Contact an Authorized Service Center for any
repairs that need to be made.

When using the Plasma TV

Do not bring your hands, face, or objects
close to the ventilation holes of the
Plasma TV.
Top of the Plasma TV is usually very hot due to the
■
high temperature of exhaust air being released
through the ventilation holes. Burns or personal
injuries can happen if any body parts are brought
too close. Placing any object near the top of the
TV could also result in heat damage to the object
as well as to the TV if its ventilation holes are
blocked.

Cleaning and maintenance

The front of the display panel has been
specially treated. Wipe the panel surface
gently using only a cleaning cloth or a soft,
lint-free cloth.
Do not scratch or hit the surface of the panel with
■
fingernails or other hard objects. Furthermore,
avoid contact with volatile substances such as
insect sprays, solvents, and thinner; otherwise, the
quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a
soft, dry cloth.
Do not allow any detergent to come into direct
■
contact with the surface of the Plasma TV. If water
droplets get inside the unit, operating problems
may result.
Avoid contact with volatile substances such as
■
insect sprays, solvents and thinner; otherwise, the
quality of the cabinet surface may be adversely
affected or the coating may peel off. Furthermore,
do not leave it for long periods in contact with
articles made from rubber or PVC.
2
HP Pavilion Plasma TV User's Guide
Be sure to disconnect all cables before
moving the Plasma TV.
Moving the TV with its cables attached might
■
damage the cables which, in turn, can cause fire
or electric shock.
Disconnect the power plug from the wall
outlet as a safety precaution before carrying
out any cleaning.
Electric shocks can result if this is not done.
■
Clean the power cable regularly to prevent it
from becoming dusty.
Built-up dust on the power cord plug can increase
■
humidity which might damage the insulation and
cause fire. Unplug the cord from the wall outlet
and clean it with a dry cloth.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared
communication equipment. Install your
infrared sensor in a place away from direct
or reflected light from your Plasma TV.
Do not allow a still picture to be displayed
for an extended period, as this can cause a
permanent afterimage to remain on the
Plasma TV.
Examples of still pictures include logos,
video games, computer images, teletext,
and images displayed in 4:3 mode.
Image Retention Protection: If still image
data is displayed for more than a few
minutes, the image retention prevention
function activates automatically and the
image disappears. Change the image or
change the input source to see an image.
n
n