Corrective Action; Replacement Parts - Banner B6350 Instructions D'utilisation Et Manuel De Pièces

tROUBLeSHOOtInG
Symptom
Jack will not lift load
Jack will lift, but not maintain
pressure
Jack will not lower after unloading
Poor lift performance
Will not lift to full extension

RePLaceMent PaRtS

(refer to page 6)
Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and
position in the assembly sequence. When ordering parts, please give the Model number and parts description. Call
or write for current pricing: SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A.
E-Mail: sales@blackhawk-automotive.com Tel: (816) 891-6390
Possible causes
• Release valve not tightly closed
• Load is too heavy
• Release valve not tightly closed
• Hydraulic unit malfunction
• Reservoir overfilled
• Linkages binding
• Fluid level low
• Fluid level low
• Hydraulic unit malfunction
• Fluid level low
5

corrective action

• Ensure release valve tightly closed
• Consider higher capacity jack
• Ensure release valve tightly closed
• Discontinue use, contact Banner
technical service
• Drain fluid to proper level
• Clean and lubricate moving parts
• Ensure proper fluid level
• Ensure proper fluid level
• Discontinue use, contact Banner
technical service
• Ensure proper fluid level
Fax: (816) 891-6599