Preparation; Dry Ironing - Grundig SIS 8250 Mode D'emploi

OPERATION _________________________________

Preparation

1 Remove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2
Clean the outer parts of the appliance as de-
scribed in the section "Cleaning and care".
3 Place the appliance on an even, stable, dry
and non-slip surface.
4 Place the iron onto the storage base
Notes
During first use, a slight odour may occur as
7
a result of manufacturing residues being burnt
off. This is harmless and will only last for a
short time. Ensure for sufficient ventilation.
Never immerse the steam ironing station in
7
water or any other liquid. Do not fill in the
steam ironing station with vinegar, descaling
agents, starch, perfume or ironing aids.
When ironing for the first time, use an old,
7
clean cloth so that manufacturing residues
can be removed from the soleplate

Dry Ironing

1
Place the appliance on an even, dry and non-
slip surface. The non-slip feet
bility of the appliance.
2
The water tank must remain empty during
C
the dry ironing process; otherwise steam pres-
sure could build up.
3 Insert the power plug
4
Push the On/Off switch
steam ironing station.
– The power indicator
blue steam button indicator light blinks on
LOW P .
E .
D .
U ensure the sta-
B into the wall socket.
S to switch on the
N lights up red and the
5
Depending on the type of fabric, turn the tem-
perature control dial
settings:
Nylon, setting 1
Silk setting 1
Wool setting 2
Cotton setting 3
Linen setting 3
Caution
Always read the care label on your garment
7
before setting the temperature.
– The temperature indicator light
blue. The blue temperature indicator light
remains on while the iron is heating up. As
soon as the iron reaches the set temperature,
the temperature indicator light goes off. The
temperature indicator light will go on and
off during usage to indicate that the set tem-
perature is being regulated.
6 The ironing process can begin. Do not press
the steam jet button during dry ironing.
Caution
When taking a break from ironing, always
7
place the iron back onto the storage base
E . The tip of the soleplate
placed on the surface of the storage base.
to one of the following
G
•
•
••
•••
•••
K lights up
D must always be
ENGLISH 23
K