Setting the parameter safety key
Selected parameters should be protected to avoid tampering:
• Press 'ENTER' several times until the word 'nnn' shows on the display
• Select a number other than 3 using the arrow keys and press 'ENTER'
This number will be requested any time the set parameter is changed.
The parameter protection is erased by doing the following:
• Press the 'ENTER' button several times until the word 'nnn' shows on the display
• Select number 3 using the arrows and press 'ENTER'
The programmer will now no longer request a password.
Printer recorder (optional)
The autoclave is supplied with a temperature printer connection.
Printer records:
a. Date
b. Batch number
c. Temperature recorded during the segment of time programmed
d. Sterilisation progressive number carried out automatically
How to insert the paper
Pressing the two levers (E), open the panel and insert paper
as shown.
If the paper is correctly installed the 'pos F' LED light is on.
A flashing LED indicates that the paper is not properly installed.
By pressing button G you can scroll the paper.
12