Heating Element Replacement; Temperature/Pressure Rate; Spare Parts - VWR VAPOUR-Line lite II Manuel D'instructions

Heating element replacement

Disconnect the electric supply, unscrew the two fixing nuts on the outside bottom of the sterilisation
chamber and insert a new heating element. To re-assemble, repeat the same steps in reverse order.
Ensure that the water level in the sterilisation chamber always covers the heating element.
Temperature/pressure rates
Temperature (°C) 100
Pressure (PSI) 0

Spare parts

Description
1 Manometer
2 Heating element 200 V, 1300 W
(110 V on request)
3 Sealing ring
4 Overpressure plug
5 Main switch
6 Sacrificial body
7 Pressure regulator
8 Controller for autoclave
9 Printer
10 Black start button
Printer paper
102 105 109
1.45 2.90 5.80
Cat. No.
481-0717
481-0777
481-0719
481-0720
481-0779
481-0721
481-0722
481-0848
481-0840
481-0839
481-0775
11
112 115 119
7.25 10.15 13.05
120
14.50