Getting Started - Salora DPF1040ST Manuel De L'utilisateur

Getting Started

Accessories
-Stand
-Ac adaptor
Appearance
Power Button
USB Jack
Micro SD slot
DC Jack
Power button
Hold the Power button for 2-3 seconds, the screen will start up. When it is
turned on, tap once shortly to go into standby mode. Tap again to turn it
back on. In the stand-by mode the device will consume less power . Hold
the Power button for 2-3 seconds to turn frame off. On the screen the two
following questions will be asked: "Turn off" or "Restart". Select by tapping
the screen.
Connections
USB: The frame can be connected to the PC via a USB cable (not included).
You can also use a USB stick to import and back-up pictures.
Micro SD: Micro SD can be used to import and back-up pictures.
The micro SD format must be MSFAT32 in order for the frame to be able
to read the data.
Note: The format MSFAT can only be used for cards with max 32GB.
DC outlet: Port for the power supply with an AC adaptor.
Installation of the stand
You can position the stand to landscape
or portrait size.
1.Put down the frame.
15