Publicité
TA-ZH1ES compatible for ultimate sound
Do your headphones and your music justice with the TA-ZH1ES Signature Series stationary amp, featuring an innovative
analog feed-forward full digital amplifier for purer, more responsive sound. It supports PCM 32 bit/384kHz and DSD11.2MHz
sound formats, as well as balanced and unbalanced connections.
Specifications
General Features(Headphone)
CableLength
Cable Type
Diaphragm
Driver Unit
Frequency Response
Headphone Type
Impedance
Magnet
Plug
Power Handling Capacity
Sensitivity
Wearing Style
Weights (Approx.) *excl.cable erights
Accessories
Supplied Accessories
1. Only compatible with High-Resolution Audio when wired.
© 2016 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Sony and the Sony logo are registered trademarks of Sony
Corporation. HDMI is a trademark of HDMI Licensing LLC. Bluetooth is a trademark of Bluetooth SIG, Inc. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other trademarks are
trademarks of their respective owners. Features and specifications are subject to change without notice.
Updated: September 16, 2016
Headphone cable (Approx. 3 m (118 1/8 in), silver-coated OFC strands, Gold-
plated stereo mini plug), Balanced-connection headphone cable (Approx. 1.2 m
(47 1/4 in), silvercoated OFC strands, L-shaped gold plated balanced standard
plug)
Detachable Y type
Aluminum coated LCP edge diaphragms with Magnesium dome
70 mm, dome type (CCAW Voice Coil)
4 Hz - 120,000 Hz
Closed, dynamic (circum-aural)
64 Ω at 1 kHz
Neodymium
Headphone cable (Gold-plated stereo mini plug), Balanced-connection
headphone cable (L-shaped gold plated balanced standard plug)
2,500 mW (IEC)
100 dB/mW
Circum-aural
14 oz (385 g) without cable
Gold-plated unimatch plug adaptor (stereo phone plug - stereo mini jack)
Headphone cable (approx. 3 m (118 1/8 in))
Balanced-connection headphone cable (approx. 1.2 m (47 1/4 in))
Hard Case
Publicité
