Traditional Cooking; Changing The Cooking Mode; Changing Temperature; Pre-Heating Phase - Fulgor Milano F7DSPD24S1 Instructions Pour L'installation Et L'utilisation

Changing the cooking mode

1. During untimed cooking, a cooking pause can be set by
pressing the key.
All the settings of the suspended cooking operation
remain stored and can be reactivated by pressing the
same key again.
2. To change the cooking mode while the oven is working,
press the key and then the
At this point, another cooking mode can be selected from
among those available in the group by means of the
arrows .

Changing temperature

IMPORTANT
• At the end of a function, the display screen shows
the residual compartment heat temperature from the
standby page.
1. From the cooking mode preview display page, the
temperature can be changed by means of the arrows
subsequently confirming by means of the
2. Once cooking has started, the temperature can in any
case be changed, at any time, by means of the arrows
.
, key.
key.

9 - Traditional Cooking

Pre-heating phase

While the oven is in pre-heating phase, the current
temperature is displayed underneath the cooking mode
icon.
TRUE CONVECTION
275°F
11:00 am
Just as soon as the set temperature is reached, an acoustic
signal is heard and the current temperature indication
disappears.
TRUE CONVECTION
11:06 am
+ +
325°F
- -
+ +
325°F
- -
EN
19