Operating Instructions; Checking For Leaks; First Use; Lighting - Blue Rhino GBT830L Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembly Instructions (continued)
17
Lock Lid
Unlock Lid
Outdoor LP Gas Barbecue Grill Model No. GBT830L

Operating Instructions

This grill is designed to operate with a one pound 7-3/8" high disposable / 16.4 oz. or 14.1 oz.
propane gas tank (DOT 39 Cylinder).
DO NOT ATTEMPT TO REFILL ANY ONE POUND (16.4 oz. or 14.1 oz.) PROPANE GAS TANKS!
Connecting Gas Tank
1. Make sure the regulator/control valve is in the "LOCK
OFF" position. (Figure 1a)
2. Lubricate the threads of the regulator valve with
petroleum jelly, insert the gas tank into the regulator
valve and hand-tighten firmly. (Figure 1b)
3. Test for leaks

Checking for Leaks

Burner Connection
1. Make sure the control valve is securely fastened to
the burner. (Figure 2)
If your unit was assembled for you, visually check the
connection between the burner and control valve.
WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion which
can cause death, serious bodily injury,
or damage to property.
2. If the burner pipe does not rest flush to the control
valve, please contact 1.800.762.1142 for assistance.
Regulator / 1# LP Gas Tank Connection
1. Make 2-3 oz. of leak solution by mixing one part
liquid dishwashing soap with three parts water.
2. Make sure control knob is "OFF". (Figure 3)
3. Spoon several drops of solution, or use squirt bottle,
at the LP gas tank to regulator connection. (Figure 4)
4. Inspect the solution at the connection, looking for
bubbles.
a. If NO bubbles appear, the connections are
secure.
b. If bubbles appear, you have a leak.
1. Loosen and retighten this connection,
making sure the connection is secure.
2. Retest with solution.
a. If you continue to see bubbles after several attempts, disconnect propane
source and contact 1.800.762.1142 for assistance.

First Use

1. Make sure all labels, packaging and protective films
have been removed from the grill.
2. Remove manufacturing oils before cooking on this
grill for the first time, by operating the grill for at least
15 minutes on "HIGH" with the lid closed. This will
"heat clean" the internal parts and dissipate odors.

Lighting

Caution: Keep outdoor gas cooking
appliance area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
Caution: Do not obstruct the flow of
combustion and ventilation air.
Caution: Check and clean burner/venturi
tubes for insects and insect nests. A
clogged tube can lead to a fire beneath
the grill.
1. Make sure all labels, packaging and protective films
have been removed from the grill.
2. Open lid. Attempting to light the burner with the
lid closed may cause an explosion!
3. Make sure there are no obstructions of airflow to the
gas unit. Spiders and insects can nest within and clog
the burner / venturi tube at the orifice.
A clogged burner tube can lead to a fire
beneath the appliance.
4. Control knob must be in the "LOCK OFF" position.
(Figure 3)
5. Turn the control knob to "HIGH"
Figure 1a
Figure 1b
LOCK
OFF
PUSH
TO
TURN ON
Figure 2
Figure 3
LOCK
OFF
PUSH
TO
TURN ON
Figure 4
X
X
Figure 5
Figure 6
1/2"
Flame
12.7 mm
1/4"
6.4mm
0"
0mm

Publicité

Table des Matières
loading

Table des Matières