Dmx Linking - ILLUMINARC COLORIST PANEL 8Qa Guide De Référence Rapide

Colorist™ Panel 8Qa QRG
What Is
Included
AC Power
Power Linking
IP65 Power Cable
Table
IP65 Power
Connector Pins

DMX Linking

DMX Connection
IP65 DMX Cable
Table
IP65 DMX
Connector Pins
·
Colorist™ Panel 8Qa
·
Warranty Card
·
Quick Reference Guide
This product has an auto-ranging power supply that can work with an
input voltage range of 100 to 240 VAC, 50/60 Hz.
You can link up to 21 Colorist™ Panel 8Qa products at 120 V;
37 at 208 V; or 38 at 230 V. Never exceed this number. Power linking
cords can be purchased separately.
Connection
AC Live
AC Neutral
AC Ground
Male Power IP65 Connector
When connecting the Colorist™ Panel 8Qa to local power, it may be
necessary to use the local-to-IP65 adapters supplied with this
product.
The Colorist™ Panel 8Qa will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.iluminarc.com.
The Colorist™ Panel 8Qa uses a regular DMX data connection for its
DMX personalities: 4-CH, 6-CH, and 10CH. See the User Manual to
connect and configure for DMX operation.
Connection
Ground
Data -
Data +
Male IP65 (DMX Input)
To connnect the Colorist™ Panel 8Qa to your DMX network, it is
necessary to use the 3-pin to 5-pin adapters supplied with this
product.
When not using the Power Output, DMX Input or DMX Output
connectors, you must seal the cable ends with the supplied caps.
·
IP65 Power Input/Output
Cords with adapters
·
IP65 Data Input/Output Cords
with adapters
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
F
emale Power IP65 Connector
DMX (U.S.) DMX (Europe)
Shield
White
Red
F
3
IP65 Pin
Brown
Blue
IP65 Pin
Shield
Blue
Brown
emale IP65 (DMX Output)
EN
1
2
3
1
2
3