About This Guide - ILLUMINARC COLORIST PANEL 8Qa Guide De Référence Rapide

Colorist™ Panel 8Qa QRG
About this
Guide
Disclaimer
Safety Notes
Contact
The Colorist™ Panel 8Qa Quick Reference Guide (QRG) has basic
product information such as connection, mounting, menu options, and
DMX values. Download the User Manual from
more details.
The information and specifications contained in this QRG are subject to
change without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
DO NOT look at the light source when the product is on.
·
CAUTION: This product's housing is hot when lights are operating.
·
Mount this product in a location with adequate ventilation, at least
50 cm (20 in) from adjacent surfaces.
·
In outdoor environments, the product aperture must not hang
between 171° and 189° on the vertical axis where 0° is straight up.
·
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
·
DO NOT submerge the product (IP65). Regular outdoor operation is
fine.
·
Not for permanent outdoor installation in locations with extreme
environmental conditions. This includes, but is not limited to:
Exposure to a marine/saline environment (within 3 miles
o
of a saltwater body of water).
Where the normal high or low temperatures of the
o
location exceed the temperature ranges in this manual.
Locations that are prone to flooding or being buried in
o
snow.
Other areas where the product will be subject to extreme
o
radiation or caustic substances.
·
USE a safety cable when mounting this product overhead.
·
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
ONLY use the hanging/mounting bracket to carry this product.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature range is -20 °F to 110 °F
(-29 °C to 43 °C). Do not operate this product outside these
temperatures.
Please consult with an Iluminarc Sales Representative on the
suitableness of this product for your installation. Failure to follow these
guidelines or the recommendations of the Iluminarc Sales Representative
may result in the product warranty being rendered VOID and any repair
cost being the sole responsibility of the buyer.
Outside the U.S., United Kingdom, Ireland or Mexico, contact your
distributor to request
www.iluminarc.com
support or
for contact information.
2
www.iluminarc.com
return a product.
EN
for
Visit