Kemper 65438KWB Mode D'emploi page 11

5. The appliance has dangerous components that must be kept out of the reach of children.
6. Make sure the power plug can be disconnected at any time.
7. Do not lay the power cord under a carpet. Do not cover the power cord with a cover or similar elements.
Pay attention not to place the power cable where it is likely to get into people's way.
8. Never connect the power cord to extensions or triple plugs. Do not pull or damage the power cord. Before
any maintenance operations, disconnect the plug from the mains socket.
9. If the appliance does not work properly, immediately turn off the fan heater and disconnect it from the
mains socket. For repairs, contact a technical support centre authorised by the manufacturer, and require
that original spare parts be used. Using parts that do not conform to the product may seriously compromise
its correct operation.
10. Attention, do not use the appliance, if the lamp is broken.
11. In order to unplug the appliance, select the OFF button and disconnect the plug from the power socket.
USER INSTRUCTIONS
Wall installation with bracket
• Remove all the packaging material. Check if plug and cable are not damaged.
• Before drilling the wall, in order to install the appliance, be sure it complies with all the following minimum
safety distances, from walls and ceilings. (fig. 1)
• Fix the supplied L bracket to the wall in a stable and safe position
• Assemble the heater to the bracket
•
Adjust the angle of the lamp: recommended 45 ° angle (fig. 3).
• Connect the appliance to the electricity network, when the unit is turned on it will take a few seconds before
start up heating. Check the correct functioning for the first 10-15 minutes.
ATTENTION: The heater has to be fixed on walls, where there are no combustible materials positioned,
directly above the appliance or in any case in the immediate vicinity. Otherwise, place the product at a
minimum distance of 1 m from the ceiling, from the lateral walls and from other thermo-sensitive materials.
MAINTENANCE
Attention: To improve efficiency of the product, it is recommended that you clean it from dust at least
every 80/100 hrs of functioning.
1. After use and before cleaning unplug the appliance and wait for the heater to cool. Take away the appliance
from the wall.
2. Wipe the outer shell with a soft damp cloth, do not use solvents.
3. ATTENTION: never touch the bulb with bare hands as contact with the human skin could damage the bulb.
Always use protective gloves. ATTENTION: for cleaning, never use alcohol solvents or other acids.
4. To replace the bulb, contact a specialized center.
5. Do not throw the box, use it to store the equipment.
6. When you don't use the appliance, store it in its original packaging and store in a dry place.
ISTR65438KWB-N_REV.01_ 07/2019
mounted on the wall using the wing nuts and bolts provided (fig. 2).
FIG. B
FIG. D
using the supplied screws.
FIG. C
FIG. E
65435KWB-N
11/12