Important Precautions; Important Safeguards - Nostalgia Electrics Vintage Serie Manuel D'instruction

IMPORTANT PRECAUTIONS

1. NEVER use a scouring pad on the unit.
2. NEVER leave unit unattended while in use.
3. NEVER place anything other than the intended sugar in the Extractor Head.
4. NEVER pour water or any other liquid into the Extractor Head.
5. NEVER put fingers on or near the Extractor Head or Heating
Element while machine is on, nor while it is still hot.
6. Unplug unit from outlet when not in use and when cleaning.
7. DO NOT operate this appliance with a damaged cord or plug
or in the event the appliance ever malfunctions.
8. DO NOT put in dishwasher.
9. Keep out of reach of children.
10. This appliance is NOT A TOY.
11. This appliance is not intended for use by unsupervised young
children or cognitively challenged individuals.
12. Young children should be supervised while product is in use
to ensure that they do not play with the appliance.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions
should always be followed, including:
13. Read all instructions before operating this appliance.
14. DO NOT TOUCH the hot surfaces.
15. To protect against electrical shock do not immerse cord, plug
or any part of this unit in water or other liquids.
16. Close supervision is necessary when any appliance is used by or near children.
17. Unplug from outlet when not in use and before removing parts for cleaning.
18. DO NOT operate any appliance with a damaged cord or plug or
if the appliance has been damaged in any manner. Return the
appliance to the nearest repair shop for examination or repair.
19. The manufacturer does not recommend the use of accessory
attachments. Use of attachments may cause injuries.
20. DO NOT use outdoors.
21. DO NOT let the cord touch hot surfaces.
22. DO NOT pour water or any other liquid into the Extractor Head.
23. DO NOT place on or near a hot gas or electric burner, or in a heated oven.
24. Extreme caution must be used when moving this appliance.
25. This unit must be on a level surface to operate properly.
3