User Manual //
Easy Home DVB-T Flip
Introduction
Frontal panel
1.Signal LED 2.Power/Standby LED
3.Remote Control Sensor 4.USB Port
Back panel
1.Aerial input jack (75Ω) 2.TV SCART output jack
NOTE: Please unplug the power cord and keep it orderly when the unit shall
not be in use for a long time.
Remote Control
1.STANDBY button: Switch on or off standby status.
2.TV/R: Switch between TV channel and Radio channel.
3.MUTE: Switch on or off sound output.
4.CH+/ CH-: Shift channels one by one according to the channel No.
14