How To Assemble And Use - Proctor Silex 58130N Mode D'emploi

How to Assemble and Use

WARNING! Your blender jar and cutting blades are
subject to wear during normal use. To reduce the risk of
swallowing or biting sharp objects, always inspect
cutting blades for broken, cracked, or loose blades. If jar
or cutting blades are damaged, do not use. Contact our
toll-free customer service number for replacement parts.
1. Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being
pulled up into motor during operation.
2. Set jar into place on blender base, making sure it is
securely seated
3. Put ingredients in jar and place lid on jar.
4. Plug cord into outlet.
5. Process food or beverages. Always place lid on jar when
blending liquids. Select speed or pulse setting and push
HI/LO button left or right as needed to process foods.
Rotate and hold speed control knob to the left to operate
Pulse continuously.
6. When blending hot liquids, remove center-piece of two-
piece lid. Hot liquids may push lid off jar during blending.
To prevent possible burns: do not fill blender jar beyond
the 3-cup (750 ml) level. With the protection of an oven
mitt or thick towel, place one hand on top of lid. Keep
exposed skin away from lid. Start blending at lowest
speed.
7. ALWAYS turn blender off and wait until blades have stopped
rotating before removing jar.
8. To remove jar after blending is complete, lift jar straight up.
9. NEVER replace jar onto unit while motor is running.
5