Exquisit EM 6001 sw Mode D'emploi page 18

Machine à glaçons
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ICE lamp on display is not
ON.
The ice falls like a single
block, with a lot of cubes
sticking together.
The compressor operates, but
no ice can be made.
Ice making is normal, but ice
dumping function fails.
The equipment stops
suddenly after ice making for
some time.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
Specifications
Model: EM6001sw
Rated voltage: 220-240V~
Power: 120W
Safety class: I
Ambient conditions: Temperature: +5 to +32°C
Ice output: 13kg / 24 hours
Ice storage: 1kg
High efficiency compressor CFC-free: R600a
Water storage: 1.9 L
TERMS OF GUARANTEE
For our products, the legal terms concerning claims under guarantee are valid. During the
legal period, all material and manufacturing defects are covered. No claims will be accepted
for broken accessories, defects resulting from inappropriate use or care, excessive wear due to
intensive use, wrong use due to the non-observance of the instruction manual, or normal wear
and tear. No guarantee claims will be accepted if the appliance has been modified or if
attempts have been made to repair the appliance. In such case, the vendor cannot be held
responsible in case of accidents.
Blown fuse / No power.
The water temperature in the
water storage box or the ambient
temperature is too low.
The refrigerant leaks.
The solenoid valve leaks.
The solenoid valve fails.
The computer board fails.
Excessively high environmental
temperature results in start-up of
the thermal protector of the
equipment.
18
Replace fuse / Turn power on.
Stop the machine and reset the
ice making cycle. Restart the
machine after turning it off.
Contact the after sales service.
Contact the after sales service.
Turn off the appliance & restart
it 1 hour later.
on the

Publicité

Table des Matières
loading

Table des Matières