AUTO-HAK J49 Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
J49
Cat. no.
Class: A50-X
Designed for:
Manufacturer: HYUNDAI
Model: ELANTRA
Type: 4/5 door (XD)
produced since 08.2000 till 2006
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 1384
This towbar is design according to rules of safety traffic regulations. The towing
hitch is a safety component and must be installed only by qualified personnel.
Any alteration or conversion to the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 8,0 kN
maximum trailer weight: 1400 kg
maximum vertical cup load: 65 kg
Foreword
Max vehicle weight [kg]
9,81
X =
1000
Max vehicle weight [kg]
D [kN]