Jimmy F6 Manuel De L'utilisateur page 5

When the machine starts up every time, its original mode is
medium temperature and medium speed. Press mode
button,you can choose cool mode, heat/cool circulation
mode or adjust to the original hot mode.(Picture 3)
*Press mode button for 10-15s to enter "Turbo" mode.
6
4
5
The product is equipped with easily
disassemble magnetic nozzle, which
can spin 360°.(Picture 4)(Picture 5)
Please install the nozzle under the
switch-off status, do not disassemble
the nozzle during using to avoid scald.
After using, reassemble it until the
nozzle cool down to avoid scald.
Please keep the distance of more than
10cm between hair and inlet,avoiding
hair from entangling into the hair dryer.
Please keep the distance of more than
3cm between hair and outlet to avoid
scald.
After using, switch to off and unplug
the power line.
7